Freeduino Soldering Instructions
Jump to navigation
Jump to search
Remove and Identify all the components[edit]
Resistors[edit]
Identify Resistors, Solder the one with the Orange Stripe First (10K) , and then Solder the 6 with red stripes (1K) resistors. Put the legs through the holes , and solder to the back. Make sure that your joints are shiny rather than clunky.
Ceramic Capacitors[edit]
Identify the Ceramic Capacitors. You should have eleven ceramic capacitors: Two 22 picofarad (22pF) , One 10 nanofarad (10 N), One 4.7 microfarad (4.7uF) and Seven 100 nanofarad (100N). Start with the 22 pF capacitors , then the 10 N, then the 4.7uF, and then finally the seven 100N
