Art pieces around Resistor: an inevitably incomplete list, in no particular order[edit]

LED art[edit]

Hexascroller. Connected to Home Assistant over mqtt.
Cupri Sun. Now runs WLED on a QuinLED-Dig-Quad, and is connected to Home Assistant.
Mini Pyramid. Built on the BeagleBone Black PRU. Not connected to the network.
SparkSign. Since re-brained with a Pico W by Adam, running a custom firmware. Not connected to mqtt (yet).
Cubescroller. Built on BeagleBone Black / Octoscroller. Not connected to the network.
Rainbow bars. Originally built on the BeagleBone Black PRU. In the process of being completely rebuilt and rebrained with WLED on a QuinLED-Dig-Quad by Guillaume, Bill, and Vince.
The cloud was by Tiby Kantrowitz, and has since been rebuilt and re-brained by Guillaume and Bill. Now runs WLED on a generic ESP32, and is connected to Home Assistant, which updates the colours based on the weather conditions using automations. The original code used different colors.
Three tensegrity pink bars above the couches. Not connected to the network. Runs on some kind of Arduino. Not connected to the network.
Multicolor cubes in cubesville. Not connected to the network. Runs on some kind of Arduino. Not connected to the network.
Collapsing digital clock in Tooltown. Unknown. Not connected to the network.
Collapsing digital clock on the mezzanine. Unknown. Not connected to the network.
Red LED matrix on the mezzanine. Unknown. Not connected to the network.
Red LED matrix by the couches. Unknown. Not connected to the network.
Red lion eyes above Cubesville. Unknown. Not connected to the network.
Video D20 above table. Plays video file on the card, currently an abortion graphic. Not connected to the network.

Interactive art[edit]

RetroPi table. Currently stays on all the time.

Art on walls[edit]

Men in hats poster by Devo