Help:Properties and types
Properties and types are the basic way of entering semantic data in Semantic MediaWiki. Properties can be viewed as «categories for values in wiki pages». They are used by a simple mark-up, similar to the syntax of links in MediaWiki:
- [[property name::value]]
This statement defines a value for the property of the given property name. The page where this is used will just show the text for value and not the property assignment.
Existing links can be directly augmented with such property information, while other types of data (such as numbers or calendar dates) need an additional editing step.
Turning Links into Properties
Consider the Wikipedia article on Berlin. This article contains many links to other articles, such as «Germany», «European Union», and «United States». However, the link to «Germany» has a special meaning: it was put there since Berlin is the capital of Germany. To make this knowledge available to computer programs, one would like to «tag» the link
in the article text, identifying it as a link that describes a «capital property». With Semantic MediaWiki, this is done by putting a property name and :: in front of the link inside the brackets, thus:
In the article, this text still is displayed as a simple hyperlink to «Germany». The additional text capital of is the name of the property that classifies the link to Germany. As in the case of categories, the name of the property is arbitrary, but users should try to re-use properties that already appear elsewhere.
To simplify this re-use, every property has its own article in the wiki, just as every category has an article. You can see all the properties in use in the wiki with the Special:Properties page. Just as category articles are prefixed with Category:, all property articles are prefixed with Property: to distinguish them from other articles. So you can also also use MediaWiki's Special:Search page to find existing properties. As with categories, a property's article can be empty, but it is strongly recommended to add a description that explains the intent of the property and its proper usage.
There are various ways of adding properties to pages:
|What it does||What you type|
|Classify a link with the property "example property."|
Classify a [[example property::link]] with the property "example property."
|Make alternate text appear in place of the link.|
Make [[example relation::link|alternate text]] appear in place of the link.
|To hide the property from appearing at all,
use a space as the alternate text.
To hide the property [[example relation::link| ]] from appearing at all
|To make an ordinary link with :: without creating a property, escape the markup with a colon in front, e.g.
The C++ :: operator.
The [[:C++ :: operator]].
|To assign one value to multiple properties, add :: between each name,
Turning values in text into Properties
There is other useful information in articles besides links. For example, there is a number in the Berlin article giving its population. To make this knowledge available to computer programs, one would like to "tag" the text
in the article, identifying it as a value for the "population property". With Semantic MediaWiki, this is done by putting the property name and :: in front of the text and surrounding it with [[ ]] brackets, thus:
This works fine. However, it creates a link to a 3,396,990 page, and having an article for every population value probably does not make sense. Furthermore, if you wanted to create a list of all German cities ordered by population, numeric order is different from the alphabetical order that you would expect for article names. For example, in alphabetical order, "1,000,000" comes before "345".
Types of Properties
We want to be able to tell Semantic MediaWiki that "population" is a number, not a link to a page in the wiki. The way to do this is to specify a type for the "population" property. Semantic MediaWiki has several built-in datatypes that we can choose for properties. For our population example, the appropriate type is called Type:Number; the prefix "Type:" is again a separate namespace that distinguishes descriptive articles about types from normal pages. We want to give property "population" a special property that specifies it has "type:number". To support this Semantic MediaWiki has a built-in special property called Property:Has type. We use the same syntax for this special property as for any other property, so in the Property:Population article, we write:
(You don't need to specify the Type: namespace here.)
Semantic MediaWiki knows a number of special properties like Property:has type. Regardless of whether these properties have their own articles in the wiki, they have a special built-in meaning and are not evaluated like other relations.
Datatypes are very important for evaluating properties. Firstly, the datatype determines how tools should handle the given values, e.g. for displaying values and sorting values in search results. Secondly, the datatype is required to understand which values have the same meaning, e.g. the values "1532", "1,532", and "1.532e3" all encode the same number. Finally, some datatypes offer special functions, as will be described below. For these reasons, every attribute has a datatype.
The reason we didn't have to specify a datatype for the "capital of" property above is that the default datatype is Type:Page, which displays as a link. (Note that if you change the datatype of a property later on it does not affect the annotations of existing articles until they are saved again or purged.) Even though Type:Page is the default, you should explicitly specify a datatype to every property, just to prevent confusion or later redefinition with an unintended type.
The same mark-up for properties that are links to pages also works for properties of other datatypes. Here are some more examples.
|What it does||What you type|
|Assign the value 1,234,567 to the property "example."|
Assign the value [[example::1,234,567]] to the attribute "example."
|Assign a value of about a million, but showing different text in the article.|
Assign a value of [[example::999,331|about a million]], but showing different text in the article.
|Specifying the type in a property's article:
This property is an integer number.
Giving the type in an property's article: This attribute is an [[has type::Type:Number|integer number]].
|Combining MediaWiki markup with property values:
John's username is
Combining MediaWiki markup with property values: John's username is [[username::john|[mailto:firstname.lastname@example.org john]]].
Datatypes and units of measurement
Using different types, properties can be used to describe very different kinds of values. A complete list of available types is available from Special:Types. Basic types include:
- Type:String (text strings)
- Type:Number (integer and decimal numbers with optional exponent) (planned for SMW 1.0, this will replace Type:Integer and Type:Float in earlier versions)
- Type:Page (links to pages, the default)
These can be used creatively for very different purposes. For instance, attributes of type string can be used for encoding phone numbers (which in fact can contain non-numeric symbols).
Type:Number allows a unit after the numeric value to distinguish values (e.g. "30.3 mpg" versus "47 km/liter"), but does not know how to convert between them. To support automatic conversion and multiple unit formats, you can define your own datatype with custom units. These automatically convert values to and from standard representations, so that users are free to use their preferred unit in each article yet still query and compare with attribute values in other articles.
There are some special built-in datatypes which support more complicated formats and unit conversions.
- Type:Boolean restricts the value of an attribute to true/false (also 1/0 and yes/no).
- Type:Text (new in SMW 1.0) is like Type:String but can have unlimited length;
- Type:Temperature can't be user-defined since converting temperature units is more complicated than multiplying by a conversion factor.
- Type:Geographic coordinate describes geographic locations. It recognizes different forms of geographic coordinates. Using service links it can dynamically provides links to online map services.
- Type:Date specifies particular points in time. This type is still somewhat experimental, but may feature complex conversions between (historic) calendar models in the future.
For specifying URLs and emails, there are some special variations of the string datatype:
- Type:URL makes external links to its URL object.
- Type:Annotation URI: properties of this type are interpreted as relations to external objects, denoted by the URI. They are special since they are interpreted as annotation properties on export. See the type page for documentation.
- Type:Email stores emails as a string datavalue, but automatically links them (with mailto:) within the page.
Values of these URL types appear as links.
We mentioned the special property Property:Has type that you use to tell SMW the datatype of a property. SMW has other predefined special properties that have special meaning (even if you do not create property pages for them in your wiki). You cannot use these names for your own properties. In SMW 1.0, the list of special properties is
- Allows value, Corresponds to, Display units, Equivalent URI, Has type, Imported from, Provides service, and Subproperty of.
These internal special properties do not appear in the Special:Properties list, you cannot query for them, and a special property's page does not show the pages using the property.
"Relations" and "Attributes" in earlier versions
In earlier versions of SMW, properties with Type:Page were known as relations and only those used double colons (::) as the separator between property name and link text. All other properties (numbers, strings, etc.) were known as attributes and had to use colon equals (:=) as the separator.
SMW 1.0 unifies relations and attributes, calling them properties, and uses a single namespace "Property:". The default datatype for undeclared properties is Type:Page, but it is strongly recommended that you declare every property's type to clarify its intended use for other editors. SMW still supports := but it is recommended that you use :: for all property annotations. The reason is that the equality symbol contained in := cannot be used properly within MediaWiki template parameters, whereas :: causes no problems in most environments.